Productindex Sprayout Safety Flange Rings Stainless Steel SRM 3600
           
   

  SRM 3600
 
Sprayout-Safety-Steel-Ring
 
 
     
This range is designed for installation over flange joints to prevent injury and damage in the event of a hazardous spray out. Steel Rings SRM 3600 are used for high temperature and/or pressure applications when PP spray shields are unsuitable for the design conditions. Stainless steel spray shields in 316 are suitable for maximum operating temperature of 1100 C and maximum operating pressures of 240 bar.

Stainless steel ASTM 316 for high temperature resistance.

Sizes up to DN 600 and ANSI 24." 600.


Click here for DIN-Sizes

Material  :  Stainless steel ASTM 316
Standard Colour  :  n/a
 
  Download Data Sheet (PDF)
  SRM 3600 Picture
  3D View

     
 


Nominal
Size
Nominal Pressure D B Reference No.
SRM - ...
Flange Diameter Ring
Width
150
lbs.
300
lbs.
400
lbs.
600
lbs.
BSP Zoll
ANSI     .1/2" 89.0 3.1/2"50.0 ANSI     .1/2" - 150
ANSI     .1/2" 95.0 3.3/4"50.0 ANSI     .1/2" - 300-600
ANSI     .3/4" 99.0 3.7/8"50.0 ANSI     .3/4" - 150
ANSI     .3/4"117.0 4.5/8"50.0 ANSI     .3/4" - 300-600
ANSI   1."     108.0 4.1/4"50.0 ANSI   1."      - 150
ANSI   1."     124.0 4.7/8"50.0 ANSI   1."      - 300-600
ANSI   1.1/4"117.0 4.5/8"50.0 ANSI   1.1/4" - 150
ANSI   1.1/4"133.0 5.1/4"50.0 ANSI   1.1/4" - 300-600
ANSI   1.1/2"127.0 5." 50.0 ANSI   1.1/2" - 150
ANSI   1.1/2"155.0 6.1/8"50.0 ANSI   1.1/2" - 300-600
ANSI   2."     152.0 6." 50.0 ANSI   2."      - 150
ANSI   2."     165.0 6.1/2"50.0 ANSI   2."      - 300-600
ANSI   2.1/2"178.0 7." 50.0 ANSI   2.1/2" - 150
ANSI   2.1/2"191.0 7.1/2"50.0 ANSI   2.1/2" - 300-600
ANSI   3."     191.0 7.1/2"50.0 ANSI   3."      - 150
ANSI   3."     210.0 8.1/4"50.0 ANSI   3."      - 300-600
ANSI   3.1/2"216.0 8.1/2"50.0 ANSI   3.1/2" - 150
ANSI   3.1/2"229.0 9." 50.0 ANSI   3.1/2" - 300-600
ANSI   4."     229.0 9." 50.0 ANSI   4."      - 150
ANSI   4."     254.0 10." 50.0 ANSI   4."      - 300-400
ANSI   4."     273.0 10.3/4"50.0 ANSI   4."      - 600
ANSI   5."     254.0 10." 50.0 ANSI   5."      - 150
ANSI   5."     280.0 11." 50.0 ANSI   5."      - 300-400
ANSI   5."     330.0 13." 50.0 ANSI   5."      - 600
ANSI   6."     280.0 11." 50.0 ANSI   6."      - 150
ANSI   6."     318.0 12.1/2"50.0 ANSI   6."      - 300-400
ANSI   6."     356.0 14." 50.0 ANSI   6."      - 600
ANSI   8."     343.0 13.1/2"50.0 ANSI   8."      - 150
ANSI   8."     381.0 15." 50.0 ANSI   8."      - 300-400
ANSI   8."     419.0 16.1/2"50.0 ANSI   8."      - 600
ANSI 10."     406.0 16." 50.0 ANSI 10."      - 150
ANSI 10."     445.0 17.1/2"50.0 ANSI 10."      - 300-400
ANSI 10."     508.0 20." 50.0 ANSI 10."      - 600
ANSI 12."     483.0 19." 50.0 ANSI 12."      - 150
ANSI 12."     521.0 20.1/2"50.0 ANSI 12."      - 300-400
ANSI 12."     559.0 22." 50.0 ANSI 12."      - 600
ANSI 14."     533.0 21." 50.0 ANSI 14."      - 150
ANSI 14."     584.0 23." 50.0 ANSI 14."      - 300-400
ANSI 14."     603.0 23.3/4"50.0 ANSI 14."      - 600
ANSI 16."     597.0 23.1/2"50.0 ANSI 16."      - 150
ANSI 16."     648.0 25.1/2"50.0 ANSI 16."      - 300-400
ANSI 16."     686.0 27." 50.0 ANSI 16."      - 600
ANSI 18."     635.0 25." 50.0 ANSI 18."      - 150
ANSI 18."     711.0 28." 50.0 ANSI 18."      - 300-400
ANSI 18."     743.0 29.1/4"50.0 ANSI 18."      - 600
ANSI 20."     699.0 27.1/2"50.0 ANSI 20."      - 150
ANSI 20."     775.0 30.1/2"50.0 ANSI 20."      - 300-400
ANSI 20."     813.0 32." 50.0 ANSI 20."      - 600
ANSI 24."     813.0 32." 50.0 ANSI 24."      - 150
ANSI 24."     914.0 36." 50.0 ANSI 24."      - 300-400
ANSI 24."     940.0 37." 50.0 ANSI 24."      - 600
 


All dimensions in mm. Should your requirements not be shown please ask for separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

Please click here for entering your personal note pad and productinformation request.

Back to previous page

Think Plastic Go Protec



 

 

DEUTSCH ENGLISH FRANCAISE ENGLISH