Productindex Cable Glands Brass,Nickel Plated EPN 720
           
   

  EPN 720
 
Brass Thread Reducers
 
 
     
These components reduce the threaded entry diameter on any threaded interface from a larger to smaller thread size in order to accept a suitable gland. Configuration: from large external Metric to small internal Metric and from large external PG to small internal PG.

Material  :  Brass, nickel plated
 
  Download Data Sheet (PDF)
  EPN 720 Picture
  3D View

     
 


  from
Thread
external
to
Thread
internal
Ø Outside Length
of Thread
Height Reference No.
AG IG D h1 H
MetricM 16 x 1.5 M 12 x 1.520.0 6.0 8.5EPN 720/  M 16 - M 12
MetricM 20 x 1.5 M 12 x 1.524.0 6.5 9.0EPN 720/  M 20 - M 12
MetricM 20 x 1.5 M 16 x 1.524.0 6.5 9.0EPN 720/  M 20 - M 16
MetricM 25 x 1.5 M 16 x 1.530.0 7.010.0EPN 720/  M 25 - M 16
MetricM 25 x 1.5 M 20 x 1.530.0 7.010.0EPN 720/  M 25 - M 20
MetricM 32 x 1.5 M 20 x 1.539.0 8.011.5EPN 720/  M 32 - M 20
MetricM 32 x 1.5 M 25 x 1.539.0 8.011.5EPN 720/  M 32 - M 25
MetricM 40 x 1.5 M 25 x 1.550.0 9.012.5EPN 720/  M 40 - M 25
MetricM 40 x 1.5 M 32 x 1.550.0 9.012.5EPN 720/  M 40 - M 32
MetricM 50 x 1.5 M 32 x 1.557.010.014.0EPN 720/  M 50 - M 32
MetricM 50 x 1.5 M 40 x 1.557.010.014.0EPN 720/  M 50 - M 40
MetricM 63 x 1.5 M 40 x 1.570.010.014.0EPN 720/  M 63 - M 40
MetricM 63 x 1.5 M 50 x 1.570.010.014.0EPN 720/  M 63 - M 50
PGPG   9 PG   717.0 6.0 8.5EPN 720/  PG   9 - PG   7
PGPG 11 PG   720.0 6.0 8.5EPN 720/  PG 11 - PG   7
PGPG 11 PG   920.0 6.0 8.5EPN 720/  PG 11 - PG   9
PGPG 13.5 PG   722.0 6.5 9.0EPN 720/  PG 13.5 - PG   7
PGPG 13.5 PG   922.0 6.5 9.0EPN 720/  PG 13.5 - PG   9
PGPG 13.5 PG 1122.0 6.5 9.0EPN 720/  PG 13.5 - PG 11
PGPG 16 PG   724.0 6.5 9.5EPN 720/  PG 16 - PG   7
PGPG 16 PG   924.0 6.5 9.5EPN 720/  PG 16 - PG   9
PGPG 16 PG 1124.0 6.5 9.5EPN 720/  PG 16 - PG 11
PGPG 16 PG 13.524.0 6.5 9.5EPN 720/  PG 16 - PG 13.5
PGPG 21 PG 1130.0 7.010.0EPN 720/  PG 21 - PG 11
PGPG 21 PG 13.530.0 7.010.0EPN 720/  PG 21 - PG 13.5
PGPG 21 PG 1630.0 7.010.0EPN 720/  PG 21 - PG 16
PGPG 29 PG 13.539.0 8.011.5EPN 720/  PG 29 - PG 13.5
PGPG 29 PG 1639.0 8.011.5EPN 720/  PG 29 - PG 16
PGPG 29 PG 2139.0 8.011.5EPN 720/  PG 29 - PG 21 
PGPG 36 PG 1650.0 9.012.5EPN 720/  PG 36 - PG 16
PGPG 36 PG 2150.0 9.012.5EPN 720/  PG 36 - PG 21
PGPG 36 PG 2951.0 9.012.5EPN 720/  PG 36 - PG 29
PGPG 42 PG 2157.010.014.0EPN 720/  PG 42 - PG 21
PGPG 42 PG 2957.010.014.0EPN 720/  PG 42 - PG 29
PGPG 42 PG 3657.010.014.0EPN 720/  PG 42 - PG 36
PGPG 48 PG 2964.010.014.0EPN 720/  PG 48 - PG 29
PGPG 48 PG 3664.010.014.0EPN 720/  PG 48 - PG 36
PGPG 48 PG 4264.010.014.0EPN 720/  PG 48 - PG 42
 


All dimensions in mm. Should your requirements not be shown please ask for separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

Please click here for entering your personal note pad and productinformation request.

Back to previous page

Think Plastic Go Protec



 

 

DEUTSCH ENGLISH FRANCAISE ENGLISH