Productindex Plastic Protectors EP 310
           
   

  EP 310
 
Outside Fitting Flange Protectors
 
 
     
Just simply push over the flange diameter. This unique style automatically slips over the flange to protect the face as well as the sides.

Far easier to remove than any other full-face, wrap-around protector on the market.
Its unique design allows coated and conical bore flanges to be easily protected.

From DN 10 - DN 300 and.1/2 10. acc. to EN 12351, DIN 3443-B, ANSI B 16.5 and.BASF WN 14-150 Form B

Material  :  LD-PE, low density polyethylene
Standard Colour  :  yellow
 
  Download Data Sheet (PDF)
  EP 310 Picture
  3D View

     
 


Dimensions
Nom Ø
Series
Pressure Group
D
Ø Flange
H
Internal
Protector
Depth
Standard
Pack
Reference No.
DIN DN   15 PN 10. 16. 25. 40 95.017.0 7.5200EP 310/  15/10-40
DIN DN   20 PN 10. 16. 25. 40105.019.0 7.5150EP 310/  20/10-40
DIN DN   25 PN 10. 16. 25. 40115.019.0 7.5150EP 310/  25/10-40
DIN DN   32 PN 10. 16. 25. 40140.019.0 7.5150EP 310/  32/10-40
DIN DN   40 PN 10. 16. 25. 40150.019.5 7.5125EP 310/  40/10-40
DIN DN   50 PN 10. 16. 25. 40165.021.0 4.5100EP 310/  50/10-40
DIN DN   65 PN 10. 16. 25. 40185.022.0 4.5 75EP 310/  65/10-40
DIN DN   80 PN 10. 16. 25. 40200.024.0 7.5 60EP 310/  80/10-40
DIN DN 100 PN 10. 16220.024.0 7.5 50EP 310/100/10-16
DIN DN 100 PN 25. 40235.024.0 7.5 50EP 310/100/25-40
DIN DN 125 PN 10. 16250.025.0 7.5 40EP 310/125/10-16
DIN DN 150 PN 10. 16285.025.0 7.5 30EP 310/150/10-16
DIN DN 150 PN 25. 40300.027.0 7.5 30EP 310/150/25-40
DIN DN 200 PN 10. 16340.027.0 7.5 20EP 310/200/10-16
DIN DN 200 PN 25360.030.012.0 20EP 310/200/25
DIN DN 200 PN 40375.034.0 7.5 20EP 310/200/40
DIN DN 250 PN 10395.029.0 8.0 20EP 310/250/10
DIN DN 250 PN 16406.530.0 8.5 20EP 310/250/16
DIN DN 300 PN 10445.029.0 7.8 25EP 310/300/10
DIN DN 300 PN 16460.031.0 8.0 20EP 310/300/16
ANSI B 16.5     .1/2" 150 89.014.2 4.5250EP 310/    .1/2" /150
ANSI B 16.5     .1/2" 300 95.017.0 4.5250EP 310/    .1/2" /300
ANSI B 16.5     .1/2" 600 95.017.0 4.5250EP 310/    .1/2" /600
ANSI B 16.5     .3/4" 150 98.515.7 7.5200EP 310/    .3/4" /150
ANSI B 16.5   1." 150108.017.5 7.5150EP 310/  1."      /150
ANSI B 16.5   1." 300124.020.5 4.5175EP 310/  1."      /300
ANSI B 16.5   1." 600124.020.5 4.5175EP 310/  1."      /600
ANSI B 16.5   1.1/2" 150127.020.5 7.5175EP 310/  1.1/2"/150
ANSI B 16.5   2." 150152.422.1 7.5100EP 310/  2."      /150
ANSI B 16.5   2." 300165.021.0 4.5100EP 310/  2."      /300
ANSI B 16.5   3." 150190.527.0 7.5 60EP 310/  3."      /150
ANSI B 16.5   4." 150228.528.0 7.3 40EP 310/  4."      /150
ANSI B 16.5   6." 150279.529.0 7.5 25EP 310/  6."      /150
ANSI B 16.5 10." 150406.530.012.0 20EP 310/10."      /150
 


All dimensions in mm. Should your requirements not be shown please ask for separate quotation.
PROTEC products and specifications are subject to improvement and change without notice.

Please click here for entering your personal note pad and productinformation request.

Back to previous page

Think Plastic Go Protec



 

 

DEUTSCH ENGLISH FRANCAISE ENGLISH